Janty KissBox is an advanced model of electronic cigarettes and very popular among smokers for its classic design and smoking satisfaction. Most of the smokers face difficulties while operating Janty Kissbox and I am going to guide you how to use it properly. First of all you have to charge the batteries via the USB cable. You can charge it either from your laptop or desktop PC quite easily and if you don’t have a PC or a laptop then use the power adaptor. Always remove the charger after charging the batteries. While charging for the very first time you need to charge the batteries for 14-16 hours even if the LED light turns green and after that smoke for 20 minutes. Now again charge the battery for another 4 hours and your battery is ready for normal use.

When you are done with the charging, it’s time to attach the cartridge into the atomizer and you can do so by screwing the switch of your own choice on the atomizer and also screw fit the battery in the switch as well. Your Janty is now ready to smoke and start inhaling softly. The unit will start response and it will produce vapors. The Janty KissBox comes with two types of switches; manual and automatic. The manual switch needs to be turned ON in order to start smoking while an automatic switch turns ON automatically whenever you inhale and it de-activates after every 4 seconds to prevent the overheating of atomizer and to save the battery power.

If you are carrying around the Janty with you, try to keep it separate from other items to keep it scratch less. Use the Janty pouch for carrying around.